Warner Marine EcoBak 1L

ecoBAK is a unique and novel biodegradable polymer that serves as both a food and substrate for specific strains of bacteria that remove Phosphate and Nitrogenous compounds from aquarium water.

The simple version of how it works?

Basically the ecoBAK is a unique organic Carbon food source that just happens to be the preferred food source for several strains of bacteria that facilitate the removal of Phosphates and Nitrates. As the bacteria consumes the biodegradable polymer, it also simultaneously consumes Phosphate and Nitrate.

In effect, ecoBAK reduces nuisance algae clarifies water and supplies Planktonic bacteria as a food source for corals in the reef aquarium. EcoBAK works naturally, with NO harmful chemical additives.

What’s this mean for your tank?

You will now have water quality that previously could ONLY be obtained by frequent water changes, giant protein skimmers and expensive Zeolite systems.

You will have less problems with nuisance algae, your corals will grow better and look better (better colors) and your fish will be healthier. You will be able to feed your system more food as you no longer have to worry about raising your Phosphate and Nitrate levels.

How do you do it?

Place the ecoBAK in a suitable fluidized reactor or in many instances a media bag. Run approximately 100gph of flow thru each liter of media. Make sure you run a protein skimmer and make sure it’s working well. If possible, run the output of the reactor into the same sump area as the intake pump for the skimmer.

Usage

Use 250ml per 50 gallons of water volume. Rinse the ecoBAK pellets in purified fresh water. The pellets can be soaked overnight to reduce floating pellets. Add the rinsed pellets into a fluidized bio-pellet media reactor. Attach a small pump to the reactor and adjust flow to approximately 100gph per liter of ecoBAK. The proper amount of flow will create a gentle tumbling effect inside the reactor. Direct the output of the reactor into the same area as the protein skimmer pump intake. Within 3-4 weeks the ecoBAK will be sufficiently colonized with bacteria to begin reducing organic compounds. Aquariums with high bio-load may experience a short period of temporary water cloudiness. Tips for best performance:

Start off with 1/3 of the recommended dosage of ecoBAK and add another 1/3 every week until a full dosage is employed.

Remember to run a GENTLE tumble. An overly aggressive tumble is counter productive.

Aquariums with very high Nitrate and Phosphate (Nitrate 40ppm+, Phosphate 2ppm+) should start off slowly, with 1/4 dosage of ecoBAK, confirm proper function of protein skimmer and confirm that circulation pumps are running and agitating the water surface.

Make sure your protein skimmer is properly rated for your aquarium. Protein skimmer manufacturers frequently exaggerate the capacity ratings of their skimmers.

Replace ecoBAK as it is consumed by bacteria.